Will it print?
What to feed the Voron 2.4
You built it, so feed it anything
A finished 2.4 brings a 350 °C hotend, a 120 °C bed, and a big enclosed box, which is why this page lists all eight families, nylons and polycarbonate included. Polymaker calls out Voron-style enclosed builds specifically for their PolyMax PC.
The exotic families' real bottleneck
Dryness, not degrees. PC wants 80 °C for 8 or more hours of drying, PA6 wants drying right before use, and both want sealed storage. The printer is ready; the spool usually isn't.
Big-format thinking
The 350 mm cube swallows cosplay and furniture-scale prints whole. For those, easy families first: a helmet in PLA or PETG is a far better weekend than a helmet in ABS.
What to feed the Voron 2.4
You built it, so feed it anything
A finished 2.4 brings a 350 °C hotend, a 120 °C bed, and a big enclosed box, which is why this page lists all eight families, nylons and polycarbonate included. Polymaker calls out Voron-style enclosed builds specifically for their PolyMax PC.
The exotic families' real bottleneck
Dryness, not degrees. PC wants 80 °C for 8 or more hours of drying, PA6 wants drying right before use, and both want sealed storage. The printer is ready; the spool usually isn't.
Big-format thinking
The 350 mm cube swallows cosplay and furniture-scale prints whole. For those, easy families first: a helmet in PLA or PETG is a far better weekend than a helmet in ABS.
Top picks for the Voron 2.4 (DIY)
Editor-tested filaments: start here.
Tuned for Bambu A1/P1S/X1C out of the box. No dial-in needed when using AMS with the built-in profiles.
Creality's own high-speed PLA, the default spool for K1 and Ender-3 V3 owners.
The budget Amazon staple of the Ender/Neptune era: consistent, cheap, and everywhere.
The classic budget PLA+: tougher than plain PLA, semi-matte finish, and a decade of community trust.
US hobbyist staple: widely available on Amazon Prime, consistent quality, and sold in a huge color range.
The Micro Center house brand. If there's a store near you, it's the cheapest reliable PLA+ you can walk out with today.
Great per-kg value with consistent results. A popular starting point when you want to print a lot without spending much.
Forgiving matte surface hides layer lines beautifully. It's the most beginner-friendly PLA Polymaker makes.
All compatible filaments
1,816 filaments work with this printer, popular brands first, showing 50. Full lists: PLA, PETG, TPU, ABS, ASA, PA6, PA12, PC