Black

TPU 95A HF

Bambu Lab · TPU · Black

TPU
6 colors

1.22 g/cm³ · ±0.03 mm · OFD 2026-07-11

Nozzle
230°C
220°tune within range240°
From https://us.store.bambulab.com/products/tpu-95a-hf
Bed
33°C
30°tune within range35°
From https://us.store.bambulab.com/products/tpu-95a-hf

Before you print

1 thing to know about this spool

  • Dry it before you print

    It quietly soaks up moisture from the air, which leaves prints rough, weak and stringy. Dry it first, then keep it sealed.

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
1 kg
Density
1.22 g/cm³
Diameter tolerance
±0.03 mm
Available colors (6)
Black
#101820
Editorial notesUpdated 2026-07-10

Unlike most TPU, this high-flow version is rated for AMS-speed printing. Bambu's comparison table lists 230 °C as the default nozzle.

Sources & verification