Hyper PLA

Name: Hyper PLA
Brand: Creality

Creality · PLA · Black

PLAEditor's Pick

Creality's own high-speed PLA — the default spool for K1 and Ender-3 V3 owners.

1.25 g/cm³ · ±0.03 mm · OFD 2026-07-11

Nozzle

220°C

190°tune within range230°

From https://store.creality.com/products/hyper-series-pla-3d-printing-filament-1kg

Bed

43°C

25°tune within range60°

From https://store.creality.com/products/hyper-series-pla-3d-printing-filament-1kg

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Grab a spool

Also at Creality Store.

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Other retailers

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

OrcaSlicer already includes this filament. Pick “Creality Hyper PLA” in its filament list — the built-in profile is tuned even further than ours.

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Cura

Temperatures from https://store.creality.com/products/hyper-series-pla-3d-printing-filament-1kg, baked into the file with a source note.

Available colors (15)

Black

#282C2C

Sources & verification