PLA Aero

Name: PLA Aero
Brand: Bambu Lab

Bambu Lab · PLA · Gray

PLA

2 colors

1.21 g/cm³ · ±0.03 mm · OFD 2026-07-11

Nozzle

205°C

190°tune within range220°

Bed

55°C

50°tune within range60°

Manufacturer didn't publish exact temps for this filament. The numbers above are the typical PLA range. Confirm them on your first print. View Bambu Lab's datasheet →

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Grab a spool

Also at Bambu Lab Store.

Find on Amazon

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Other retailers

Bambu Lab Store

Print profile

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

Bambu Studio already includes this filament. Pick “Bambu PLA Aero” in its filament list — the built-in profile is tuned even further than ours.

OrcaSlicer already includes this filament. Pick “Bambu PLA Aero” in its filament list — the built-in profile is tuned even further than ours.

Bambu Studio.json OrcaSlicer.json PrusaSlicer.ini Cura.xml.fdm_material

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Download the .ini file.
File → Import → Import Config Bundle.
Select the filament preset it adds.

Cura

Download the material file.
Preferences → Materials → Import.
Choose it as your material.

Temperatures are the typical PLA range (not filament-specific) — the file says so too. Confirm on your first print.

Specs

Diameter: 1.75 mm
Spool sizes: 1 kg
Density: 1.21 g/cm³
Diameter tolerance: ±0.03 mm

Available colors (2)

Gray

#CDCDCB

Sources & verification

Data: Open Filament Database
Manufacturer datasheet: https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PLA_Aero_Technical_Data_Sheet.pdf?v=1715335547
Safety datasheet: https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Aero_MSDS.pdf?v=1691044402
OFD snapshot generated: 2026-07-11

PLA Aero

straightenSpecs

Specs