PETG Basic

Name: PETG Basic
Brand: Bambu Lab

Bambu Lab · PETG · Black

PETG

1.25 g/cm³ · ±0.03 mm · OFD 2026-07-11

Nozzle

245°C

230°tune within range260°

From Bambu Lab PETG Basic TDS V3.0 (store.bambulab.com)

Bed

70°C

65°tune within range75°

From Bambu Lab PETG Basic TDS V3.0 (store.bambulab.com)

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Grab a spool

Also at 3D Eksperten & Bambu Lab Store.

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Other retailers

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

Bambu Studio already includes this filament. Pick “Bambu PETG Basic” in its filament list — the built-in profile is tuned even further than ours.

OrcaSlicer already includes this filament. Pick “Bambu PETG Basic” in its filament list — the built-in profile is tuned even further than ours.

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Cura

Temperatures from Bambu Lab PETG Basic TDS V3.0 (store.bambulab.com), baked into the file with a source note.

Available colors (12)

Black

#000000

Sources & verification