TPU on the Voron 2.4 (DIY)
Yes, easily. DIY kit you build yourself. Specs here follow the official reference build; yours may differ.
TPU prints great on the Voron 2.4 (DIY)
Direct drive, good for flexiblesPrinter
The Voron 2.4 (DIY)’s motor sits right on the print head, which is what soft filament needs. Keep speed down around 20-40 mm/s and turn retraction low.
Keep the spool dryMaterial
TPU soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 50-60 °C for 6-12 h and store it sealed with desiccant.
Nothing special neededPrinter
The Voron 2.4 (DIY) handles TPU without extra equipment. Load it and print.
Safe starting ranges for TPU as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
Top TPU picks for the Voron 2.4 (DIY)
Editor-tested spools: start here.
The most beginner-friendly TPU: 95A shore hardness strikes the balance between flexibility and printability.
The classic first flexible: forgiving 95A shore, prints on stock Bowden printers if you go slow.
More TPU spools
169 TPU filaments in the catalog, popular brands first. See the full TPU list.