PA6 (Nylon 6) on the Voron 2.4 (DIY)
Yes, with a couple of cautions. DIY kit you build yourself. Specs here follow the official reference build; yours may differ.
PA6 (Nylon 6) works on the Voron 2.4 (DIY), mind a couple of things
Stay at the cool end of the nozzle rangePrinter
PA6 (Nylon 6) runs 250-280 °C, but the Voron 2.4 (DIY) stops at 270 °C. Printable, just without the hotter half of the range.
Enclosed chamber, exactly what this material wantsPrinter
The Voron 2.4 (DIY) is a closed box, so PA6 (Nylon 6) cools slowly and evenly instead of warping.
Keep the spool dryMaterial
PA6 (Nylon 6) soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 70-90 °C for 12-16 h and store it sealed with desiccant.
Buying the CF version of PA6 (Nylon 6)?
Carbon-fiber filament sands down the Voron 2.4 (DIY)’s stock nozzle. Plain PA6 (Nylon 6) is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for PA6 (Nylon 6) as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
More PA6 (Nylon 6) spools
76 PA6 (Nylon 6) filaments in the catalog, popular brands first. See the full PA6 (Nylon 6) list.