Nozzle
235°C
220°tune within range250°
Bed
80°C
70°tune within range90°
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 1 kg
- Density
- 1.25 g/cm³
- Diameter tolerance
- ±0.03 mm
Available colors (9)
Clear
#FFFFFF
Sources & verification
- Data: Open Filament Database
- Manufacturer datasheet: https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PETG_Translucent_Technical_Data_Sheet.pdf?v=1704680051
- Safety datasheet: https://cdn.shopify.com/s/files/1/0611/4036/9460/files/MSDS_Bambu_PETG_Translucent.pdf?v=1704250140
- OFD snapshot generated: 2026-07-11