Galaxy

PLA

Bambu Lab · PLA · Galaxy

PLAEditor's Pick

Tuned for Bambu A1/P1S/X1C out of the box — no dial-in needed when using AMS with the built-in profiles.

4 colors

1.24 g/cm³ · ±0.02 mm · OFD 2026-07-11

Nozzle
210°C
190°tune within range230°
Bed
60°C
50°tune within range70°
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
1 kg
Density
1.24 g/cm³
Diameter tolerance
±0.02 mm
Available colors (4)
Galaxy
#492972
Editorial notesUpdated 2026-05-10

If you own a Bambu printer, start here. The spool geometry and moisture seal are designed to work with AMS without manual humidity management for short prints. For multi-day storage, still seal it.

Sources & verification