Polycarbonate on the Sovol SV08
Yes, but it takes extra gear or care. Open-frame Voron-style speed machine at a budget price.
Polycarbonate is tricky on the Sovol SV08
No enclosure on this printerPrinter
The Sovol SV08 is open to the room, and Polycarbonate warps and cracks in open air. Small parts can survive; for anything bigger, add an enclosure (even a grow tent or a box over the printer helps).
Use the lower end of the bed rangePrinter
Some Polycarbonate spools ask for up to 120 °C on the bed; the Sovol SV08 reaches 100 °C. Set the bed near 100 °C and add a glue stick if corners lift.
Keep the spool dryMaterial
Polycarbonate soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 80-90 °C for 6-8 h and store it sealed with desiccant.
Buying the CF version of Polycarbonate?
Carbon-fiber filament sands down the Sovol SV08’s stock nozzle. Plain Polycarbonate is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for Polycarbonate as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
More Polycarbonate spools
54 Polycarbonate filaments in the catalog, popular brands first. See the full Polycarbonate list.