ABS on the Sovol SV08
Yes, but it takes extra gear or care. Open-frame Voron-style speed machine at a budget price.
ABS is tricky on the Sovol SV08
No enclosure on this printerPrinter
The Sovol SV08 is open to the room, and ABS warps and cracks in open air. Small parts can survive; for anything bigger, add an enclosure (even a grow tent or a box over the printer helps).
Use the lower end of the bed rangePrinter
Some ABS spools ask for up to 110 °C on the bed; the Sovol SV08 reaches 100 °C. Set the bed near 100 °C and add a glue stick if corners lift.
Fumes: give it fresh airMaterial
ABS gives off unpleasant fumes while printing. Run it in a ventilated room you are not sitting in, or vent the printer outside.
Buying the CF version of ABS?
Carbon-fiber filament sands down the Sovol SV08’s stock nozzle. Plain ABS is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for ABS as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
More ABS spools
154 ABS filaments in the catalog, popular brands first. See the full ABS list.