PA6 (Nylon 6) on the Sovol SV08
Yes, but it takes extra gear or care. Open-frame Voron-style speed machine at a budget price.
PA6 (Nylon 6) is tricky on the Sovol SV08
No enclosure on this printerPrinter
The Sovol SV08 is open to the room, and PA6 (Nylon 6) warps and cracks in open air. Small parts can survive; for anything bigger, add an enclosure (even a grow tent or a box over the printer helps).
Use the lower end of the bed rangePrinter
Some PA6 (Nylon 6) spools ask for up to 110 °C on the bed; the Sovol SV08 reaches 100 °C. Set the bed near 90 °C and add a glue stick if corners lift.
Keep the spool dryMaterial
PA6 (Nylon 6) soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 70-90 °C for 12-16 h and store it sealed with desiccant.
Buying the CF version of PA6 (Nylon 6)?
Carbon-fiber filament sands down the Sovol SV08’s stock nozzle. Plain PA6 (Nylon 6) is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for PA6 (Nylon 6) as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
More PA6 (Nylon 6) spools
76 PA6 (Nylon 6) filaments in the catalog, popular brands first. See the full PA6 (Nylon 6) list.