PA6 (Nylon 6) on the Elegoo Neptune 4
Yes, but it takes extra gear or care. Open budget machine with a big following and Klipper speed.
PA6 (Nylon 6) is tricky on the Elegoo Neptune 4
No enclosure on this printerPrinter
The Elegoo Neptune 4 is open to the room, and PA6 (Nylon 6) warps and cracks in open air. Small parts can survive; for anything bigger, add an enclosure (even a grow tent or a box over the printer helps).
Keep the spool dryMaterial
PA6 (Nylon 6) soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 70-90 °C for 12-16 h and store it sealed with desiccant.
Buying the CF version of PA6 (Nylon 6)?
Carbon-fiber filament sands down the Elegoo Neptune 4’s stock nozzle. Plain PA6 (Nylon 6) is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for PA6 (Nylon 6) as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
More PA6 (Nylon 6) spools
76 PA6 (Nylon 6) filaments in the catalog, popular brands first. See the full PA6 (Nylon 6) list.