ABS on the Creality K1
Yes, with a couple of cautions. Enclosed and quick. Creality sells the K1C when you want carbon fiber.
ABS works on the Creality K1, mind a couple of things
Use the lower end of the bed rangePrinter
Some ABS spools ask for up to 110 °C on the bed; the Creality K1 reaches 100 °C. Set the bed near 100 °C and add a glue stick if corners lift.
Fumes: give it fresh airMaterial
ABS gives off unpleasant fumes while printing. Run it in a ventilated room you are not sitting in, or vent the printer outside.
Enclosed chamber, exactly what this material wantsPrinter
The Creality K1 is a closed box, so ABS cools slowly and evenly instead of warping.
Buying the CF version of ABS?
Carbon-fiber filament sands down the Creality K1’s stock nozzle. Plain ABS is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for ABS as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
Top ABS picks for the Creality K1
Editor-tested spools and Creality's own line: start here.
More ABS spools
154 ABS filaments in the catalog, popular brands first. See the full ABS list.