PA6 (Nylon 6) on the Bambu Lab P1S
Yes, with a couple of cautions. Enclosed CoreXY workhorse. Adds ABS and ASA to the easy list.
PA6 (Nylon 6) works on the Bambu Lab P1S, mind a couple of things
Use the lower end of the bed rangePrinter
Some PA6 (Nylon 6) spools ask for up to 110 °C on the bed; the Bambu Lab P1S reaches 100 °C. Set the bed near 90 °C and add a glue stick if corners lift.
Enclosed chamber, exactly what this material wantsPrinter
The Bambu Lab P1S is a closed box, so PA6 (Nylon 6) cools slowly and evenly instead of warping.
Keep the spool dryMaterial
PA6 (Nylon 6) soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 70-90 °C for 12-16 h and store it sealed with desiccant.
Buying the CF version of PA6 (Nylon 6)?
Carbon-fiber filament sands down the Bambu Lab P1S’s stock nozzle. Plain PA6 (Nylon 6) is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for PA6 (Nylon 6) as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
Top PA6 (Nylon 6) picks for the Bambu Lab P1S
Editor-tested spools and Bambu Lab's own line: start here.
More PA6 (Nylon 6) spools
76 PA6 (Nylon 6) filaments in the catalog, popular brands first. See the full PA6 (Nylon 6) list.