PA6 (Nylon 6) on the Anycubic Kobra 2
Yes, but it takes extra gear or care. Open budget bed slinger for the everyday materials.
PA6 (Nylon 6) is tricky on the Anycubic Kobra 2
No enclosure on this printerPrinter
The Anycubic Kobra 2 is open to the room, and PA6 (Nylon 6) warps and cracks in open air. Small parts can survive; for anything bigger, add an enclosure (even a grow tent or a box over the printer helps).
Stay at the cool end of the nozzle rangePrinter
PA6 (Nylon 6) runs 250-280 °C, but the Anycubic Kobra 2 stops at 260 °C. Printable, just without the hotter half of the range.
Keep the spool dryMaterial
PA6 (Nylon 6) soaks up moisture from the air, and damp filament prints rough and stringy. If that happens, dry the spool at 70-90 °C for 12-16 h and store it sealed with desiccant.
Buying the CF version of PA6 (Nylon 6)?
Carbon-fiber filament sands down the Anycubic Kobra 2’s stock nozzle. Plain PA6 (Nylon 6) is fine; for the CF variant, fit a hardened steel nozzle first (a cheap swap).
Safe starting ranges for PA6 (Nylon 6) as a family, not gospel. Each spool below has its exact manufacturer numbers, the dated source, and one-click slicer settings on its page.
Top PA6 (Nylon 6) picks for the Anycubic Kobra 2
Editor-tested spools and Anycubic's own line: start here.
More PA6 (Nylon 6) spools
76 PA6 (Nylon 6) filaments in the catalog, popular brands first. See the full PA6 (Nylon 6) list.