Nozzle
215°C
205°tune within range245°
From https://www.sunlu.com/products/pla-plus-2-0-filament
Bed
55°C
50°tune within range60°
From https://www.sunlu.com/products/pla-plus-2-0-filament
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.
Specs
- Diameter
- 1.75 mm / 2.85 mm
- Spool sizes
- 250 g – 5 kg
- Density
- 1.26 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (29)
Beige
#EAD8AB
+ 5 more colors
Editorial notesUpdated 2026-07-10
SUNLU tiers the range by speed: 205–215 °C up to 100 mm/s, 215–245 °C for 100–200 mm/s. Start at 215 °C and go hotter only if you print fast.
Sources & verification
- Data: Open Filament Database
- OFD snapshot generated: 2026-07-12