PETG Carbon Fiber

Name: PETG Carbon Fiber
Brand: SUNLU

SUNLU · PETG · Black

PETG

1.24 g/cm³ · ±0.02 mm · OFD 2026-07-11

Nozzle

235°C

220°tune within range250°

Bed

78°C

70°tune within range85°

Manufacturer didn't publish exact temps for this filament. The numbers above are the typical PETG range. Confirm them on your first print.

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Grab a spool

Also at SUNLU.

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Other retailers

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Cura

Temperatures are the typical PETG range (not filament-specific) — the file says so too. Confirm on your first print.

Available colors (1)

Black

#000000

Sources & verification