Ash Gray

PLA Matte Rapido

QIDI Tech · PLA · Ash Gray

PLA
9 colors

1.32 g/cm³ · ±0.02 mm · OFD 2026-07-12

Nozzle
215°C
190°tune within range240°
Bed
45°C
30°tune within range60°
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
1 kg
Density
1.32 g/cm³
Diameter tolerance
±0.02 mm
Available colors (9)
Ash Gray
#313335
Sources & verification