PLA

Prusament · PLA · Anthracite Grey

PLAEditor's Pick

Tightest diameter tolerance in its class (±0.02 mm) and the default on the Prusa MK4. It's the benchmark everything else is measured against.

44 colors

1.24 g/cm³ · ±0.05 mm · OFD 2026-08-25

Nozzle

215 °C

205°tune within range225°

Bed

50 °C

40°tune within range60°

Before you print

1 thing to know about this spool

Print inside an enclosure
It cools too fast in open air and can warp or crack. A closed-in printer holds the heat around the print (chamber at least 18°C).

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained database this catalog is built on.

Grab a spool

Also at Prusa3D Store.

Find on Amazon

Other retailers

Prusa3D StoreShips from EU

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Print profile

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

PrusaSlicer already includes this filament. Pick “Prusament PLA” in its filament list. The built-in profile is tuned even further than ours.

OrcaSlicer already includes this filament. Pick “Prusament PLA” in its filament list. The built-in profile is tuned even further than ours.

Bambu Studio.json OrcaSlicer.json PrusaSlicer.ini Cura.xml.fdm_material

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Download the .ini file.
File → Import → Import Config Bundle.
Select the filament preset it adds.

Cura

Download the material file.
Preferences → Materials → Import.
Choose it as your material.

Temperatures from the Open Filament Database, baked into the file with a source note.

Bambu Studio and OrcaSlicer store a separate bed temperature for each build plate. This profile sets the Textured PEI and High Temp plates; on a Cool Plate, Cool Plate SuperTack or Engineering Plate your slicer keeps its own built-in value.

Specs

Diameter: 1.75 mm
Spool sizes: 970 g / 1 kg / 2 kg
Density: 1.24 g/cm³
Diameter tolerance: ±0.05 mm

Available colors (44)

Anthracite Grey

#3F4647

+ 20 more colors

Editorial notesUpdated 2026-05-10

Prusa publishes per-spool quality-control data on the label (scan the QR code). The tolerance consistency makes a measurable difference on flow-sensitive prints like flexible joints or fine text. Costs more per kg than generic PLA, but the reliability is worth it on long prints you can't afford to restart.

Sources & verification