Anthracite Grey

PETG

Prusament · PETG · Anthracite Grey

PETG
29 colors

1.27 g/cm³ · ±0.02 mm · OFD 2026-07-11

Nozzle
250°C
240°tune within range260°
Bed
80°C
70°tune within range90°

Before you print

2 things to know about this spool

  • Fit a hardened-steel nozzle

    What is mixed into this filament — fiber or glow pigment — grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.

  • Print inside an enclosure

    It cools too fast in open air and can warp or crack. A closed-in printer holds the heat around the print (chamber at least 18°C).

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
1 kg / 2 kg
Density
1.27 g/cm³
Diameter tolerance
±0.02 mm
Available colors (29)
Anthracite Grey
#3F4647

+ 5 more colors

Editorial notesUpdated 2026-05-10

Prusament's PETG holds the same ±0.02 mm tolerance standard as their PLA. Good choice for functional parts that need chemical resistance (water containers, clips that touch oils). The per-spool QC data is published same as their PLA line.

Sources & verification