Nozzle
200°C
185°tune within range215°
Bed
60°C
50°tune within range70°
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 100 g / 500 g / 1.5 kg
- Density
- 2.3 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (3)
Brass
#8F7846
Sources & verification
- Data: Open Filament Database
- OFD snapshot generated: 2026-07-12