Nozzle
255°C
240°tune within range270°
Bed
75°C
60°tune within range90°
Before you print
3 things to know about this spoolFit a hardened-steel nozzle
What is mixed into this filament — fiber or glow pigment — grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.
Dry it before you print
It quietly soaks up moisture from the air, which leaves prints rough, weak and stringy. Dry it at 65°C first, then keep it sealed.
Print inside an enclosure
It cools too fast in open air and can warp or crack. A closed-in printer holds the heat around the print (chamber at least 35°C).
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 1 kg
- Density
- 1.25 g/cm³
- Diameter tolerance
- ±0.03 mm
Available colors (4)
Black
#000000
Sources & verification
- Data: Open Filament Database
- OFD snapshot generated: 2026-07-12