Beige

PLA PolySmooth

Polymaker · PLA · Beige

PLA
11 colors

1.1 g/cm³ · ±0.02 mm · OFD 2026-07-12

Nozzle
205°C
190°tune within range220°
From https://wiki.polymaker.com/polymaker-products/polymaker-filaments/specialty-filament/polysmooth-tm-pvb
Bed
48°C
25°tune within range70°
From https://wiki.polymaker.com/polymaker-products/polymaker-filaments/specialty-filament/polysmooth-tm-pvb
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm / 2.85 mm
Spool sizes
750 g
Density
1.1 g/cm³
Diameter tolerance
±0.02 mm
Available colors (11)
Beige
#E9DF97
Editorial notesUpdated 2026-07-10

The party trick: it's PVB, so isopropyl-alcohol vapor melts the layer lines into a gloss finish (Polymaker's Polysher does this safely). Prints like PLA otherwise.

Sources & verification