Black

Matte PLA

Polymaker · PLA · Black

PLAEditor's Pick

Forgiving matte surface hides layer lines beautifully — the most beginner-friendly PLA Polymaker makes.

2 colors

1.31 g/cm³ · ±0.02 mm · OFD 2026-07-11

Nozzle
210°C
190°tune within range230°
Bed
60°C
50°tune within range70°
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
2.5 kg
Density
1.31 g/cm³
Diameter tolerance
±0.02 mm
Available colors (2)
Black
#161618
Editorial notesUpdated 2026-05-10

Bambu A1 / P1S users frequently report 215 °C nozzle gives cleaner layers than the listed 205 °C upper bound. Try the upper end of the range first if your prints look gritty. Wide color range across the Panchroma lineup makes it easy to find a shade without switching brands.

Sources & verification