Nozzle
205°C
190°tune within range220°
Bed
55°C
50°tune within range60°
Before you print
1 thing to know about this spoolFit a hardened-steel nozzle
What is mixed into this filament — fiber or glow pigment — grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.
Manufacturer didn't publish exact temps for this filament. The numbers above are the typical PLA range. Confirm them on your first print.
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 1 kg
- Density
- 1.33 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (9)
Army Green
#726747
Sources & verification
- Data: Open Filament Database
- OFD snapshot generated: 2026-07-12