Nozzle
205°C
190°tune within range220°
Bed
55°C
50°tune within range60°
Manufacturer didn't publish exact temps for this filament. The numbers above are the typical PLA range. Confirm them on your first print. View Nebula's datasheet →
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.
Specs
- Diameter
- 1.75 mm / 2.85 mm
- Spool sizes
- 500 g – 9 kg
- Density
- 1.22 g/cm³
- Diameter tolerance
- ±0.03 mm
Available colors (11)
Black
#000000
Sources & verification
- Data: Open Filament Database
- Manufacturer datasheet: https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-607.pdf
- Safety datasheet: https://api.nebulafilaments.com/wp-content/uploads/2025/02/Karta-charakterystyki-msds-PLA-607-Nebula.pdf
- OFD snapshot generated: 2026-07-12