Black

CarbonFil CF03

FormFutura · PETG · Black

PETG

1.29 g/cm³ · ±0.02 mm · OFD 2026-07-12

Nozzle
235°C
220°tune within range250°
Bed
78°C
70°tune within range85°

Before you print

1 thing to know about this spool

  • Fit a hardened-steel nozzle

    What is mixed into this filament — fiber or glow pigment — grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.

Manufacturer didn't publish exact temps for this filament. The numbers above are the typical PETG range. Confirm them on your first print. View FormFutura's datasheet →

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
500 g / 1 kg / 2.3 kg
Density
1.29 g/cm³
Diameter tolerance
±0.02 mm
Available colors (1)
Black
#2B2B2B
Sources & verification