Beige

RAPID PLA Plus

ELEGOO · PLA · Beige

PLA
11 colors

1.23 g/cm³ · ±0.02 mm · OFD 2026-07-12

Nozzle
215°C
200°tune within range230°
From https://us.elegoo.com/products/elegoo-rapid-pla-plus-filament-1-75mm-colored-1kg
Bed
50°C
35°tune within range65°
From https://us.elegoo.com/products/elegoo-rapid-pla-plus-filament-1-75mm-colored-1kg
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
250 g / 1 kg / 5 kg
Density
1.23 g/cm³
Diameter tolerance
±0.02 mm
Available colors (11)
Beige
#F4E0B8
Sources & verification