Black

PCTG CF10

Spectrum · PCTG · Black

PCTG

1.28 g/cm³ · ±0.02 mm · OFD 2026-07-11

Nozzle
253°C
240°tune within range265°
Bed
85°C
75°tune within range95°

Before you print

1 thing to know about this spool

  • Fit a hardened-steel nozzle

    What is mixed into this filament — fiber or glow pigment — grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.

Manufacturer didn't publish exact temps for this filament. The numbers above are the typical PCTG range. Confirm them on your first print.

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
500 g / 1 kg
Density
1.28 g/cm³
Diameter tolerance
±0.02 mm
Available colors (1)
Black
#101010
Sources & verification