Nozzle
260 °C
250°tune within range270°
Bed
100 °C
90°tune within range110°
Before you print
1 thing to know about this spoolDry it before you print
It quietly soaks up moisture from the air, which leaves prints rough, weak and stringy. Dry it at 60-70°C for about 4-8 hours first, then keep it sealed.
60-70 °C~4-8 h
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained database this catalog is built on.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 750 g
- Density
- 1.23 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (4)
Black
#000000
Sources & verification
- Data: Open Filament Database
- Temperatures: Fiberlogy PCTG TDS (fiberlogy.com)
- OFD snapshot generated: 2026-08-25