Black

Hyper PLA-CF

Creality · PLA · Black

PLA
5 colors

1.25 g/cm³ · ±0.03 mm · OFD 2026-07-12

Nozzle
220°C
190°tune within range230°
From https://store.creality.com/eu/products/hyper-pla-carbon-fiber-filament
Bed
45°C
From https://store.creality.com/eu/products/hyper-pla-carbon-fiber-filament

Before you print

1 thing to know about this spool

  • Fit a hardened-steel nozzle

    What is mixed into this filament — fiber or glow pigment — grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm
Spool sizes
1 kg
Density
1.25 g/cm³
Diameter tolerance
±0.03 mm
Available colors (5)
Black
#47494B
Editorial notesUpdated 2026-07-10

Carbon-fiber fill is abrasive — fit a hardened-steel nozzle before running a full spool through a stock brass one.

Sources & verification