# Generated by SpoolBites — import via File > Import > Import Config Bundle in PrusaSlicer
[filament:SUNLU ABS-FR (SpoolBites)]
inherits = Generic ABS
filament_type = ABS
filament_vendor = SUNLU
filament_density = 1.1
filament_diameter = 1.75
temperature = 245
first_layer_temperature = 245
bed_temperature = 100
first_layer_bed_temperature = 100
filament_notes = Generated by SpoolBites (www.spoolbites.com). Temps source: typical ABS range (not filament-specific — verify on first print). Only temperatures, material, diameter and density are set; all other settings inherit your slicer's defaults.