Nozzle
280 °C
265°tune within range295°
Bed
108 °C
95°tune within range120°
Before you print
1 thing to know about this spoolPrint inside an enclosure
It cools too fast in open air and can warp or crack. A closed-in printer holds the heat around the print.
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained database this catalog is built on.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 750 g
- Density
- 0.89 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (1)
Natural
#F1F1EF
Sources & verification
- Data: Open Filament Database
- Temperatures: Spectrum PP TDS (spectrumfilaments.com)
- OFD snapshot generated: 2026-08-25