Nozzle
225 °C
210°tune within range240°
Bed
90 °C
80°tune within range100°
Before you print
2 things to know about this spoolFit a hardened-steel nozzle
The stuff mixed into this filament (fiber or glow pigment) grinds down a soft brass nozzle fast. A hardened-steel one stands up to it.
Print inside an enclosure
It cools too fast in open air and can warp or crack. A closed-in printer holds the heat around the print.
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained database this catalog is built on.
Specs
- Diameter
- 1.75 mm
- Spool sizes
- 1 kg
- Density
- 0.9 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (1)
Cf
#000000
Sources & verification
- Data: Open Filament Database
- OFD snapshot generated: 2026-08-25