Sakata 3D FleX-920

Sakata 3D · TPE · NATURAL

TPE

2 colors

1.24 g/cm³ · ±0.03 mm · OFD 2026-10-17

Nozzle

233 °C

220°tune within range245°

Bed

40 °C

Before you print

1 thing to know about this spool

Dry it before you print
It quietly soaks up moisture from the air, which leaves prints rough, weak and stringy. Dry it at 60°C for about 6-12 hours first, then keep it sealed.
60 °C~6-12 h

Grab a spool

Also at Garhem 3d.

Find on Amazon

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Other retailers

Garhem 3dShips from ES

Print profile

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

Bambu Studio already includes this filament. Pick “Sakata 3D FleX-920” in its filament list. The built-in profile is tuned even further than ours.

Cura.xml.fdm_material

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Download the .ini file.
File → Import → Import Config Bundle.
Select the filament preset it adds.

Cura

Download the material file.
Preferences → Materials → Import.
Choose it as your material.

Temperatures from the Open Filament Database, baked into the file with a source note.

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained database this catalog is built on.