PMMA

Push Plastic · PMMA · Filament

1.24 g/cm³ · ±0.02 mm · OFD 2026-08-25

Nozzle

255 °C

250°tune within range260°

Bed

115 °C

110°tune within range120°

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.

Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
OFD is the Open Filament Database, the community-maintained database this catalog is built on.

Grab a spool

Check current pricing for Push Plastic PMMA.

As an Amazon Associate, SpoolBites earns from qualifying purchases.

Free downloadable print profile

Sets this spool's temperatures, material and specs in your slicer. Everything else stays at your slicer's own defaults.

How do I install this? 3 steps per slicer

Bambu Studio / OrcaSlicer

Download the file above.
Open the slicer, click the filament dropdown, choose Import (or drag the file into the window).
Pick the “(SpoolBites)” entry from your filament list.

PrusaSlicer

Cura

Temperatures from Push Plastic PMMA (Acrylic) Print Settings sheet, baked into the file with a source note.

Available colors (1)

Filament

#D9D8DE

Sources & verification