# Generated by SpoolBites — import via File > Import > Import Config Bundle in PrusaSlicer
[filament:Prusament PETG Tungsten (SpoolBites)]
inherits = Generic PETG
filament_type = PETG
filament_vendor = Prusament
filament_density = 4
filament_diameter = 1.75
temperature = 235
first_layer_temperature = 235
bed_temperature = 78
first_layer_bed_temperature = 78
filament_notes = Generated by SpoolBites (www.spoolbites.com). Temps source: typical PETG range (not filament-specific — verify on first print). Only temperatures, material, diameter and density are set; all other settings inherit your slicer's defaults.