Nozzle
380 °C
360°tune within range400°
Bed
140 °C
Before you print
2 things to know about this spoolPrint inside an enclosure
It cools too fast in open air and can warp or crack. A closed-in printer holds the heat around the print.
Needs a high-temperature hotend
It runs hotter than everyday filaments. Check your printer can reach its nozzle temperature before you buy.
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained database this catalog is built on.
Specs
- Density
- 1.24 g/cm³
- Diameter tolerance
- ±0.02 mm
Sources & verification
- Data: Open Filament Database
- Temperatures: PrimaSelect PPSU product page
- OFD snapshot generated: 2026-08-25