Natural

HIPS Tech 404

Nebula · HIPS · Natural

HIPS

1.05 g/cm³ · ±0.05 mm · OFD 2026-07-12

Nozzle
235°C
220°tune within range250°
Bed
100°C
90°tune within range110°

Before you print

1 thing to know about this spool

  • Give it plenty of fresh air

    It gives off fumes as it prints. Run it in a well-ventilated room or a filtered enclosure, not a closed bedroom.

Manufacturer didn't publish exact temps for this filament. The numbers above are the typical HIPS range. Confirm them on your first print. View Nebula's datasheet →

New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
  • Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
  • Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
  • OFD is the Open Filament Database, the community-maintained source this spec sheet comes from.

Specs

Diameter
1.75 mm / 2.85 mm
Spool sizes
500 g – 9 kg
Density
1.05 g/cm³
Diameter tolerance
±0.05 mm
Available colors (1)
Natural
#EDEDE3
Sources & verification