Nozzle
215 °C
200°tune within range230°
Bed
70 °C
65°tune within range75°
Before you print
1 thing to know about this spoolDry it before you print
It quietly soaks up moisture from the air, which leaves prints rough, weak and stringy. Dry it at 50-60°C for about 4-6 hours first, then keep it sealed.
50-60 °C~4-6 h
New here? Nozzle = printing temperature in your slicer, bed = build plate. Start at the big number.
- Nozzle is the hot-end temperature: enter it as the printing temperature in your slicer. Start at the big number; the range is the safe window to tune within.
- Bed is the heated build plate: your slicer calls it bed temperature. It helps prints stick.
- OFD is the Open Filament Database, the community-maintained database this catalog is built on.
Specs
- Diameter
- 1.75 mm / 2.85 mm
- Spool sizes
- 300 g / 750 g / 2.3 kg
- Density
- 1.14 g/cm³
- Diameter tolerance
- ±0.02 mm
Available colors (1)
Natural
#EADAC2
Sources & verification
- Data: Open Filament Database
- Manufacturer datasheet: https://www.formfutura.com/web/content/256487?download=true
- Safety datasheet: https://www.formfutura.com/web/content/256488?download=true
- OFD snapshot generated: 2026-08-25