# Generated by SpoolBites — import via File > Import > Import Config Bundle in PrusaSlicer
[filament:Fiberlogy Impact PLA (SpoolBites)]
inherits = Generic PLA
filament_type = PLA
filament_vendor = Fiberlogy
filament_density = 1.22
filament_diameter = 1.75
temperature = 238
first_layer_temperature = 238
bed_temperature = 60
first_layer_bed_temperature = 60
filament_notes = Generated by SpoolBites (www.spoolbites.com). Temps source: Fiberlogy print settings (np3dp.com, spot-checked vs Fiberlogy TDS). Only temperatures, material, diameter and density are set; all other settings inherit your slicer's defaults.